Ask your DIY question — it’s all free from a real contractor.
Get straightforward guidance for home repairs, upgrades, and troubleshooting.
No signup required to start — just post your question.
Plywood in attic
ReportQuestion
Colleen
Workmen replacing some damaged siding found that the siding toward the top of roof, attic area,is nailed into 2x4 posts, and there's no plywood. You can see into the attic between the 2x4 posts since there are no plywood "walls". ...
Please briefly explain why you feel this question should be reported.
home owner.
ReportQuestion
Gary Ames
I'm switching my dryer outlet from 240 30amp to 125 30amp because that's what the dryer I have mates with. Pulled the old four prong off and expected to find two greens a white and a black, instead I've got ...
Please briefly explain why you feel this question should be reported.
Low Pressure Pfister kitchet faucet
ReportQuestion
Enrique Salomon
Dear Mr. Amorosso,
My new kitchen faucet has very low pressure. I removed the screen like you did on one of your videos. The problem is that without that part the water still runs with low pressure. Rest of the house ...
Please briefly explain why you feel this question should be reported.
Lovelady
ReportQuestion
Gloster
There is plenty of water pressure on the cold water side but when the handle is turned to the hot water side there is not much water pressure, also just drained the hot water tank and all the water was ...
Please briefly explain why you feel this question should be reported.
Welder wiring hookup
ReportQuestion
Adam
Hey Dominick,
Here's how I hooked up my welder wiring and the outlet and wiring fried.
Here's the outlet I need to hook up my welder. It's a 50A 6-50R type.
http://i57.tinypic.com/2052gxg.jpg
Here's how I wired it. Hot wires on left/right, ground in the ...
Please briefly explain why you feel this question should be reported.
Proprietor-Professional Gutter Cleaning.
ReportQuestion
Alan Oncken
Thinking about your $500 Start a Roof Cleaning business deal. I own a very successful Gutter Cleaning business and have for 22 years. Do you have an "average" price for roof cleaning, or "average price range" for most homes? Thanks.
Please briefly explain why you feel this question should be reported.
Anode Rod or Entire Tank?
ReportQuestion
April Kirsch
Hi! Watched your anode rod replacement video on YouTube. I really appreciated your real world example and your genuine attitude.
I have well water that has never given an issue and tastes and looks like spring water for 12 years. I ...
Please briefly explain why you feel this question should be reported.
wiring a 20A-250v 3-wiring grounding
ReportQuestion
sharon
Hello,
I have a subpanel directly under my main breaker on the meter pole. This subpanel was used for a 8 x 12 shed. that was set up with a small a/c, light, and about 6 outlets. the wire running from ...
Please briefly explain why you feel this question should be reported.
Wiring a 3 wire stove top to a 4 wire input
ReportQuestion
William Courtney
I purchased a Bosch stove top to replace an old stove top. The old top had a 4 wire connector and now the new one only has a 3 wire (Black, Red & bare wire). The Bosch installation says to ...
Please briefly explain why you feel this question should be reported.
quality control technician
ReportQuestion
Alex
Just bought a house and during inspection everything was fine...I go to my garage and now the GFCI Is not lit. I take off the cover, pull the switch out, and I check the wires for current with my Klein ...
Please briefly explain why you feel this question should be reported.
hand held mirror
ReportQuestion
Val K
how can I make the inset for the mirror part of a hand held mirror. I have a router and thought I could do it free hand but it is not very good, I need a more professional looking job. ...
Please briefly explain why you feel this question should be reported.
removing a cupboard
ReportQuestion
Rhett Lawson
Hi, there.
I am planning on removing a cupboard in my bathroom and replacing it with a shower. I want to connect it to the same waste outlet as the bath tub. What fall (gradient) should the shower's waste pipe be ...
Please briefly explain why you feel this question should be reported.
Owner
ReportQuestion
Tyler MacDonald
Hello
I want to rip out my fiberglass shower and install a tile shower like you did in the video in my condo. I know I have to expose the flange then undo screws and cut it all up and take ...
Please briefly explain why you feel this question should be reported.
Baseboard heaters
ReportQuestion
Jason
Hey Dominic,
Your videos are awesome. Do you have any videos that you can make for old metal baseboard heaters? I purchased an older home with ugly baseboard heaters. Covers are expensive and making something myself would be very time consuming. ...
Please briefly explain why you feel this question should be reported.
Tile Floor
ReportQuestion
Josh
Hello,
I have seen your videos on how to install a ceramic tile floor. I will start by saying thanks for making them, they were very informative about the process.
My question is about surface preparation. I have seen other videos or ...
Please briefly explain why you feel this answer should be reported.
Report Cancel